「山水工業門控制箱」先鋒工業門電機主機接線方法



Connection Method of Pioneer Industrial Door Motor Main Engine of Shanshui Industrial Door Control Box
 

在附件中的兩根電纜線穿過防水接頭接在主機內的接線端子上：


The two cables in the accessories are connected to the terminal of the host through the waterproof joint:


電機線藍線接下“U”上(公共線）、棕、黑線分別在“V”/"M"上，黃綠雙色線接在接地標志上；


The blue line of the motor is connected with the "U" (public line), the brown line and the black line are connected with the "V" / "M" respectively, and the yellow-green double-color line is connected with the grounding sign.

限位線接紅色在"cl"(關限位）、綠線接在“OP”（開限位）、白線接在“CO”上（限位公共線）；


Limit line is connected with red in "cl" (close limit), green in "OP" (open limit) and white in "CO" (limit public line).


邊上的"NO"\CO"/"NC"是一個限位開關動作后輸出一個無源信號，“CO為公共線”，用戶可更具需要自行進行接線。


The "NO"CO"/"NC"on the edge is a passive signal output after the limit switch action,"CO is a public line", users need to connect more by themselves.


確認接線正確可靠后，擰緊防水接頭的螺母。


After confirming that the connection is correct and reliable, tighten the nut of the waterproof joint.


關于山水工業門電機三相控制箱的接線、單相控制箱的接線、您可關注我們的網站，我們會在近期為您分享。


About the wiring of three-phase control box and single-phase control box of Shanshui industrial gate motor, you can pay attention to our website. We will share it with you in the near future.